![]() |
VieSched++
VieVS VLBI Scheduling Software
|
CVieVS::AstrometricCalibratorBlock | Calibrator block |
CVieVS::AstronomicalParameters | Astronomical parameters needed for scheduling |
CSGP4::CommonConstants | |
CVieVS::ParameterSettings::Contact | Contact information |
CCoordGeodetic | Stores a geodetic location (latitude, longitude, altitude) |
CCoordTopocentric | Stores a topocentric location (azimuth, elevation, range and range rate) |
CDateTime | Represents an instance in time |
CSGP4::DeepSpaceConstants | |
CEci | Stores an Earth-centered inertial position for a particular time |
CVieVS::Solver::EstimationParamEOP | |
CVieVS::Solver::EstimationParamSource | |
CVieVS::Solver::EstimationParamStation | |
CVieVS::AbstractSource::Event | Changes in parameters |
CVieVS::Baseline::Event | Event which changes parameters |
CVieVS::Station::Event | Changes in parameters |
CVieVS::Flags | VieSched++ flags |
CVieVS::FocusCorners | |
CfocusCorners | Algorithm which focuses corners of commonly visible sky. Primary use-case for intensive sessions |
CiauASTROM | |
CiauLDBODY | |
CSGP4::IntegratorParams | |
CVieVS::LogParser::LogScan | Station log file scan |
CVieVS::LookupTable | Fast lookup tables with reduced accuracy |
CSGP4::NearSpaceConstants | |
CObserver | Stores an observers location in Eci coordinates |
CVieVS::AbstractSource::Optimization | Optimization conditions |
COrbitalElements | The extracted orbital elements used by the SGP4 propagator |
CVieVS::ParameterGroup | Objects represents a group of any type (station, source, baseline) used only for creating and reading of the parameter.xlm file |
CVieVS::MultiScheduling::Parameters | Possible multi scheduling parameters |
CVieVS::Initializer::Parameters | Parameters used in VLBI_initializer |
CVieVS::Scheduler::Parameters | General parameters used for scheduling |
CVieVS::ParameterSettings::ParametersBaselines | Baseline parameters |
CVieVS::ParameterSettings | This class stores all setup information and writes a VieSchedpp.xml file |
CVieVS::ParameterSetup | Representation of a setup in parameter.xml file |
CVieVS::ParameterSettings::ParametersSources | Source parameters |
CVieVS::ParameterSettings::ParametersStations | Station parameters |
CVieVS::Solver::Partials | |
CVieVS::Initializer::PRECALC | Pre calculated values |
CVieVS::Quasar::PreCalculated | Pre calculated parameters |
CVieVS::Scheduler::PreCalculated | Pre calculated values (deprecated) |
▼Cruntime_error | |
CDecayedException | The exception that the SGP4 class throws when a satellite decays |
CSatelliteException | The exception that the SGP4 class throws upon an error |
CTleException | The exception that the Tle class throws on an error |
CVieVS::Scan::ScanSequence | Specify custom scan sequence rules |
CSGP4 | The simplified perturbations model 4 propagater |
CVieVS::Simulator::SimPara | |
CSolarPosition | Find the position of the sun |
CVieVS::Station::Statistics | Statistics |
CVieVS::Baseline::Statistics | Baseline statistics |
CVieVS::AbstractSource::Statistics | Statistics |
▼CVieVS::Subnetting | Class Subnetting |
CVieVS::Subnetting_minIdle | Class Subnetting_minIdle |
CVieVS::Subnetting_percent | Class Subnetting_percent |
CTimeSpan | Represents a time interval |
CVieVS::TimeSystem | This class holds importang time information |
CTle | Processes a two-line element set used to convey OrbitalElements |
CVector | Generic vector |
CVieVS::VieSchedpp | This is the VieSched++ core class |
▼CVieVS::VieVS_Object | VieVS base object |
►CVieVS::AbstractAntenna | Representation of a VLBI antenna |
►CVieVS::AbstractCableWrap | Representation of an VLBI cable wrap |
►CVieVS::AbstractFlux | Representation of source flux |
►CVieVS::AbstractHorizonMask | Representation of VLBI horizon mask |
CVieVS::Ast | Create Operation in Ast format |
CVieVS::CalibratorBlock | Define calibrator blocks |
►CVieVS::Equipment | Representation of VLBI equipment |
CVieVS::Freq::Chan_def | Channel definition for observing mode |
CVieVS::HighImpactScanDescriptor | Define high impact scans |
CVieVS::HighImpactScanDescriptor::AzElDescriptor | Azimuth elevation based high impact scan descriptor |
CVieVS::Initializer | This is the VLBI initializer that creats every objects and passes them to the VLBI_scheduler |
CVieVS::LogParser | Parser for station log files |
CVieVS::MultiScheduling | Representation of VLBI multi scheduling tool |
CVieVS::Network | Representation of a VLBI network |
CVieVS::Observation | Representation of a VLBI observation |
CVieVS::ObservingMode | Observing modes |
CVieVS::OperationNotes | Create Operation notes output or skdsum output |
CVieVS::PointingVector | Representation of VLBI pointing vector |
CVieVS::Position | Representation of VLBI station position |
CVieVS::Scan | Representation of a VLBI scan |
CVieVS::ScanTimes | Representation of the VLBI scan time |
CVieVS::Skd | This is the VLBI skd-output class |
CVieVS::SkdCatalogReader | Sked catalog reader class |
CVieVS::SkdParser | Skd output file parser |
CVieVS::SkyCoverage | Representation of the VLBI sky coverage object |
CVieVS::SNR_table | Produces a SNR table for comparison with correlator |
CVieVS::Solver::PWL | |
CVieVS::SourceList | Representation of a SourceList |
CVieVS::SourceStatistics | Creates the source statistics output file |
CVieVS::StationEndposition | Information about which station can be used for fillin mode and how much time is available |
CVieVS::Subcon | Representation of a VLBI subcon |
CVieVS::Track::Fanout_definition | Fanout definition |
CVieVS::Unknown | This class defines one unknown parameter used during parameter estimation |
CVieVS::Vex | This is the VLBI vex-output class |
►CVieVS::VieVS_NamedObject | VieVS base object with name |
CVieVS::WeightFactors | Storage of all VLBI weight factors |